Fab-Seal Industrial Liners Inc.
Materials
Fab-Seal uses a variety of hi tech materials to service the plating, water, waste water, chemical, and petroleum industries.
Polyvinyl Chloride (PVC) is the backbone of our industry. Polyvinyl chloride has excellent resistance to acids and alkalis, as well as a wide range of corrosive chemicals. The combination of chemical resistance and good physical properties has led to usage in numerous industrial applications such as plating baths, coatings for tanks and pipes, protective clothing, aprons, tarpaulins, splash guards, drum linings and many others. Water resistance and low water absorption permit use for sewer pipe and coatings for ocean going ships. Resistance to attack from oxygen and ozone is very good. PVC is also resistant to oils, alcohols, aliphatic hydrocarbons and household detergents. Our high temperature PVC is used to contain fluids with a sustained temperature up to 170 degrees F., dependent on the fluids to be contained. Chemical Resistance charts are available upon request.
Following is a list of many different materials Fab-Seal uses to fabricate customized liners for the containment of hazardous and non hazardous chemicals and waste.
Materials, Colors, and Use Information |
| 30 mil & 40 mil PVC | Black | Pits, Storage Tanks, Oil Field, Saltwater, Water Tanks, Ponds |
| 60 mil PVC | Black or Gray | Pits, Storage Tanks, Oil Field, Saltwater, Water Tanks, Ponds |
| NSF/ANSI Aqua Pure: 40 mil, 60 mil, 93 mil, 125 mil & 1875 mil |
White | Potable Water, or where white appearance is needed. |
| 30 mil, 40 mil, 60 mil, 93 mil & 125 mil Vinylester PVC | Black | Floor Coverings, Plating, Galvanizing, Hydrocarbons, & Agriculture |
| 60 mil, 93 mil, 125 mil, 1875 mil PVC | Gray | Plating & Galvanizing, Floor Coverings-- - Mining Industry |
| 60 mi, 93 mil, 125 mil, 1875 mil High Temp PVC | Clear | Chromic Acids, Sulfuric Acids, Nitric Acids (to 170 F.) |
