Potable water liner, water storage liner

Potable Water Tank

Fab-Seal offers N.S.F./Ansi Standard 60 or 61 approved flexible membrane liner systems for tanks, clear wells, water vaults, chlorine, aluminum sulfate, and waste water tanks.

Fab-Seal Industrial Liners, Inc is N.S.F./Ansi Standard 60 or 61 approved! See our Certificate.

Fab-Seal's liner systems are fabricated in our factory using dielectric sealing of the same material. This process lets all seams have the same flexibility and strength as the sheet of material itself.

Fab-Seal Specializes in:

Potable Water Tank Liners
Steel and Fiberglass
Concrete Cisterns
Clear Wells
Underground Water Storage Vaults

Fab-Seal's internal liners are mechanically held and become the primary containment with the tank becoming the secondary containment, with leak detection monitors for insured protection. What Are Leak Detection Monitors?

What Are Leak Detection Monitors?
Leak detection monitors are valves installed into the tank wall just above the floor that can be opened on a scheduled basis to monitor the liner integrity.

Typical Water Storage Tank

NSF/ANSI Standard "61" Approved
Specifications

Specific Gravity	ASTM D 1505	1.27
Durometer(A-scale)	ASTM D 676	76
Tensile Strength (PSI)	ASTM D 683	2200 (minimum)
Elongation, %	ASTM D 683	400 (minimum)
100% Modulus, PSI
Elongation (PSI)	ASTM D 683	930 (minimum)
Low Temprature Impact, C	ASTM D1043	-26
Volatility (%)	Activated Carbon 24 Hrs 87 degrees C	1.7
Water Absorption (%)	ASTM D	0.25

clear well liner, water tank liner, well liner

Picture shows liner being pulled into place

water tight well liner, potable water tank liner

Picture shows clear well liner before the column cover was installed

Picture shows clear well lined columns with water tight covers (100% Potable Water Containment)

Picture shows batten strip attachment to wall of clear well

Potable Water Tank Liners

Steel and Fiberglass

Concrete Cisterns

Clear Wells

Underground Water Storage Vaults