Fab-Seal Industrial Liners Inc.

Water Tank Liners

Potable Water Tank

Fab-Seal offers NSF /Ansi Standard 60 or 61 approved flexible membrane liner systems for tanks, clear wells, water vaults, chlorine, aluminum sulfate, and waste water tanks.

Fab-Seal Industrial Liners, Inc is NSF/Ansi Standard 60 or 61 approved! See our Certificate.

Fab-Seal's liner systems are fabricated in our factory using dielectric sealing of the same material. This process lets all seams have the same flexibility and strength as the sheet of material itself.

Fab-Seal Specializes in:

• Portable Water Tank Liners
• Steel and Fiberglass
• Concrete Cisterns
• Clear Wells
• Underground Water Storage Vaults
  

 

Typical Water Storage Tank

Fab-Seal's internal liners are mechanically held and become the primary containment with the tank becoming the secondary containment, with leak detection monitors for insured protection. What

What Are Leak Detection Monitors?
Leak detection monitors are valves installed into the tank wall just above the floor that can be opened on a scheduled basis to monitor the liner integrity.

    NSF/ANSI Standard "61" Approved
Specifications

Specific Gravity	ASTM D 1505	1.27
Durometer(A-scale)	ASTM D 676	76
Tensile Strength (PSI)	ASTM D 683	2200 (minimum)
Elongation, %	ASTM D 683	400 (minimum)
100% Modulus, PSI
Elongation (PSI)	ASTM D 683	930 (minimum)
Low Temprature Impact, C	ASTM D1043	-26
Volatility (%)	Activated Carbon 24 Hrs 87 degrees C	1.7
Water Absorption (%)	ASTM D	0.25

 

Picture shows liner being pulled into place	Picture shows clear well liner with Geotextile padding on floors
Picture shows clear well lined columns with water tight covers (100% Potable Water Containment)	Picture shows batten strip attachment to wall of clear well

Fertilizer Tanks
Water Tanks
Plating & Metal Finishing
Pit, Pond & Lagoon Liners
Oil & Chemical Industry
Floor Coverings